skip to Main Content

31-026 Series Non-Tilt Window Channel Balance

$10.50

Numeric Values Only. Measure the metal channel balance length only. (Do not include the plastic ends).
Check the number that is stamped on the channel balance. (i.e. 2010, 28B, 3620, etc.)

Our channel balances are not of the flimsy metal type often found on the market but are made right here in the good old USA! Our series 31-026 includes our 18-515 Top Guide and our 18-512 Bottom guide attached to the window channel balance. We use a special rivet machine to attach the appropriate plastic guides for this series so they are ready to install by the time they are delivered to you. Please look at the guide measurement details to assure you are receiving the correct channel balance as they are non-returnable once assembled. If you are unsure you can always send us a sample to the address shown at the bottom of our website to Attn: Parts Dept. We are also here to answer any of your questions with friendly technical support. All of our channel balances are shipped complete with both plastic ends (guides) attached ready to install for the price shown above.

Ordering Information

  • Measure the metal channel balance length only. (Do not include the plastic ends)
  • Check the number that is stamped on the channel balance. (i.e. 2010, 28B, 3620, etc.)
  • When ordering it is always best to replace both sides of the window sash as just replacing the one side of the sash can make the window unstable.
  • Type the Length of the Balance and number stamped on your channel balance in the spaces provided above.

Additional information

Weight0.85 lbs
Back To Top